Click Here:- 👉 https://www.fixmestick.com/support

 

FixMeStick is a powerful tool designed to scan and remove malware, viruses, and other malicious software from your computer. It operates independently of your operating system, running directly from a USB drive to ensure that it can detect and eliminate threats that may be hidden in the operating system itself. However, like any piece of software or hardware, FixMeStick may encounter issues after system updates—especially with operating systems like Windows 10 that frequently release updates.

If you’ve recently updated your system and now find that FixMeStick is not working, you’re not alone. Many users have faced similar issues where FixMeStick fails to boot or run properly after an update. This article will guide you through common causes and troubleshooting steps to get FixMeStick working again after an update.

Why FixMeStick Stops Working After an Update

Before diving into troubleshooting, it’s important to understand why FixMeStick is not working after an update. There are several reasons that can cause this issue, some of which are related to the system update itself, while others stem from configuration changes or software conflicts.

1. System Settings Changed After Update

One of the most common reasons FixMeStick stops working after an update is that system settings—specifically, those related to booting from USB devices—may have changed. For example, Windows 10 updates can automatically alter boot order settings, disable USB devices, or enable Secure Boot, which prevents unsigned software like FixMeStick from running.

2. Corrupted FixMeStick USB Drive or Files

Another possible cause is that the FixMeStick USB drive could have been corrupted during the update process, particularly if the system was rebooted while an update was installing. Corrupt files or improper removal of the USB drive can cause FixMeStick to malfunction.

3. Antivirus or Security Software Conflicts

Windows updates often include updates to Windows Defender or other security features that might conflict with external devices like FixMeStick. Antivirus software may mistakenly flag FixMeStick as a potential threat or prevent it from scanning the system.

4. Boot Order Changes After Update

Sometimes, system updates can reset or change boot order settings in the BIOS, causing the computer to prioritize booting from the internal drive instead of the USB device. If the FixMeStick USB drive is not set as the primary boot device, your computer will bypass it and boot into your operating system, leaving FixMeStick unable to run.

5. Windows 10 Secure Boot Feature

Windows 10 includes a Secure Boot feature designed to prevent unauthorized programs from loading during system startup. After a Windows update, Secure Boot might block FixMeStick from executing, especially if the device or software is not recognized as signed by Microsoft.

How to Fix FixMeStick When It’s Not Working After an Update

If FixMeStick is not working after an update, there are several troubleshooting steps you can take to resolve the issue. The following steps address the most common causes of the problem.

1. Check and Adjust BIOS/UEFI Settings

The first step is to ensure that your computer’s BIOS or UEFI settings are configured to boot from the USB device. Updates to the system can sometimes change the boot order, preventing FixMeStick from loading properly.

Steps to adjust BIOS/UEFI settings:

  1. Restart your computer and press the appropriate key (usually F2, ESC, DEL, or F12) to enter the BIOS/UEFI settings.
  2. Look for the Boot or Boot Order section in the BIOS menu.
  3. Set USB as the first boot device to ensure that the system tries to boot from the USB drive before the internal hard drive.
  4. Disable Secure Boot: Look for Secure Boot and disable it. This will allow FixMeStick to run, as Secure Boot can block unsigned software from loading.
  5. Disable Fast Boot: If enabled, Fast Boot may prevent the USB drive from being recognized early in the boot process. Disable this option.
  6. Save changes and exit: After making the changes, save them and restart your computer with FixMeStick plugged in.

2. Reinstall or Reformat FixMeStick USB Drive

If FixMeStick is not working after an update, it is possible that the software or the USB drive itself has become corrupted. To resolve this, you may need to reformat the USB drive and reinstall the FixMeStick software.

Steps to reinstall FixMeStick:

  1. Format the USB drive: Insert FixMeStick into a working computer. Open File Explorer, right-click on the FixMeStick drive, and select Format. Choose FAT32 or exFAT as the file system, and complete the process.
  2. Download the latest FixMeStick version: Visit the official FixMeStick website and download the latest version of the software.
  3. Reinstall the software: Follow the instructions on the website to reinstall the FixMeStick software onto the USB stick.
  4. Test FixMeStick: Once the software is reinstalled, plug the FixMeStick USB drive into your computer and check if it works properly after the update.

3. Temporarily Disable Antivirus and Windows Defender

If your FixMeStick is not working after an update, it could be because your antivirus software or Windows Defender is blocking it. Some security software mistakenly identifies FixMeStick as a potential threat, preventing it from executing.

Steps to disable antivirus software:

  1. Disable Windows Defender:
    • Go to Settings > Update & Security > Windows Security > Virus & Threat Protection.
    • Turn off Real-time protection.
  2. Disable third-party antivirus: If you are using third-party antivirus software (such as Norton, McAfee, or Kaspersky), disable real-time protection temporarily.
  3. Test FixMeStick: After disabling your antivirus software, try running FixMeStick again to see if the issue is resolved.

4. Roll Back or Uninstall Recent Windows Updates

If you suspect that FixMeStick stopped working after a recent Windows update, you can try rolling back or uninstalling the update that caused the problem. Windows updates can occasionally alter system settings that interfere with external devices.

Steps to uninstall or roll back a Windows update:

  1. Go to Settings > Update & Security > Windows Update > View Update History.
  2. Click Uninstall Updates.
  3. Find the most recent update that was installed and uninstall it.
  4. Restart your computer and check if FixMeStick works properly after the update rollback.

Alternatively, you can use System Restore to revert your system back to a previous state before the update was installed:

  1. Type “System Restore” into the Windows search bar and select Create a restore point.
  2. Click on the System Restore button.
  3. Follow the prompts to restore your system to a point before the Windows update.

5. Check for FixMeStick Updates

In some cases, FixMeStick might require an update to function properly with the latest version of your operating system. If FixMeStick is outdated, it may not be compatible with recent system updates.

Steps to check for FixMeStick updates:

  1. Connect the FixMeStick USB drive to a working computer.
  2. Visit the FixMeStick website and check if a new version of the software is available.
  3. Update the FixMeStick software by following the provided instructions on the website.

Frequently Asked Questions (FAQs)

1. Why is FixMeStick not working after Windows 10 update?

Windows updates can sometimes change system settings that affect how external devices are recognized, including boot order settings or security features like Secure Boot. FixMeStick may not be able to run if these settings are altered. You can adjust your BIOS/UEFI settings, disable Secure Boot, and reformat the USB drive to fix the issue.

2. How do I fix FixMeStick if it’s not booting after an update?

If FixMeStick is not booting, check your BIOS/UEFI settings to ensure that USB boot is prioritized. Disable Secure Boot and Fast Boot, which may block the USB device from being recognized.

3. Can an antivirus block FixMeStick after a Windows update?

Yes, antivirus software—especially Windows Defender—can block FixMeStick after a Windows update. Temporarily disable real-time protection or third-party antivirus programs to allow FixMeStick to run.

4. What should I do if FixMeStick isn’t detecting malware after an update?

If FixMeStick isn’t detecting malware after a system update, make sure the FixMeStick software is up to date. You may need to reinstall or update the software, or run the scan in Safe Mode to ensure it can detect threats effectively.

5. How can I update FixMeStick?

To update FixMeStick, visit the FixMeStick website, download the latest version, and follow the instructions for reinstallation. Ensure that your FixMeStick USB drive is formatted correctly before installing the updated software.

Conclusion

If FixMeStick is not working after an update, there are several potential causes, including BIOS/UEFI setting changes, software conflicts, and corrupted USB files. By following the troubleshooting steps outlined in this article—such as adjusting boot order settings, disabling antivirus software, or reinstalling the software—you should be able to resolve the issue and get FixMeStick back up and running. If you continue to experience problems, don’t hesitate to reach out to FixMeStick support for further assistance.